• Includes valve body, pressure balance cartridge, rough-in guide, and mudguard.
• 1/2" Universal NPT & direct sweat inlets & outlets, with stops.
• Service stops include integral check valves.
• 5.0 gpm (18.9 l/min) maximum flow rate at 45 psi.
• Single lever design cycles from off through cold to hot.
• Provides temperature regulation and automatic anti-scald protection.
• One piece cartridge design simplifies installation and maintenance.
• Adjustable high temperature limit stop to control maximum water temperature.
• Requires valve trim to complete installation (sold separately).

Material

• Forged de-zincification-resistant brass body provides long term reliability and resistance to aggressive water conditions.

Technology

• Pressure-balancing diaphragm technology maintains outlet temperature within +/- 3 degrees Fahrenheit during water pressure fluctuations.

Installation

• Designed for use in standard, back-to-back and thin wall installations.
• Valve body features integral mounting locations and symmetrical valve inlets to simplify installation.
• Cartridge is reversible for installations where hot and cold supplies are reversed.
• Rough-in guide designed for both standard and thin wall installations.
• Installed valve rough-in can be flushed and pressure-tested to 150 psi max (air or water) without cartridge by using test cap (sold separately).